SPL Volume8
Model 2608

High-end Multichannel Volume Controller

Features
Cost effective
Control up to 8 channels
Perfect for DAW's or playback chains
45 mm diameter aluminum control
Toroidal transformer power supply
DB-25 connectors
Documents
Manual (148KB)
Reviews
Coming Soon

As a cost-effective alternative to our full-featured Stereo and Surround Monitoring Controllers MTC 2381 and SMC 2489, the SPL volume controllers are dedicated solely to level control.

The Volume2 model is intended for stereo applications, while the Volume8 can control up to eight channels.
Both devices are designed with active circuitries to circumvent inevitable disadvantages of passive circuitries that result in impedance variation and therefore degraded linearity in frequency response.

Who needs analog level control?

Simply put—most DAW (Digital Audio Workstation) users. A majority of D/A converters and sound cards provide nothing in the way of analog level monitoring control, and this means the necessity of varying signal levels at the converter outputs. The result is a lowered bit rate in the monitoring signal, which leads to commensurate loss of audio quality.

A further, very interesting application area is in the construction of a straight multi-channel playback chain, where the Volume8 is situated between the playback machine and either power amp and speakers or simply active speaker systems. In such cases, the playback machine must offer analog outputs. This provides for minimal financial and electronic efforts through the most direct possible playback path.

Common AV receivers employ VCA and DAC components which tend to produce more distortions, or the signal runs through further AD/DA converters for the volume control. Thus especially with SACD or DVD-A sources, only a high-quality analog, direct control of the source output ensures an unimpaired playback of the original information.

Additional Reasons for employing the Volume 8

  • High quality balancing stages with extremely good common mode rejection (minimize interferences and disturbances in the signal paths)
  • The mute switch allows for very fast reaction times in cases where loud speakers or ears should be protected (for example, with computer crashes)
  • Users of analog summing without monitoring facilities can cost effectively improve their systems

Special Features

The Volume8 is built only with analog circuitry and performance, and its high quality parts in sophisticated circuitry design are prerequisites to superior audio quality:

  • Custom designed, high end, eight-ganged potentiometer with invariable precision at each and every gain level
  • Illuminated passive mute switches from ALPS, relay switching for all channels
  • Input and outputs over DB-25 connectors (to multicore XLR or 1/4-inch TRS)
  • A high quality power supply with toroidal transformer
  • Input and outputs over DB-25 connectors (to multicore XLR or 1/4-inch TRS)
  • Massive, 45 mm/1.78-inch diameter aluminum knob ensure consistent, refined handling
  • The elegant, compact format housing (215 x 80 mm or 8.5 x 3.1 inch) allows for flexible desktop positioning near or below a computer monitor or generally saving space in positioning.

 

Back to top
 

The electrical pin configuration of the balanced DB 25 input and output sockets comply with the TASCAM standard (see graphic below). The nominal input level is +4 dB, other levels are transmitted 1:1.
DB 25 to XLR, TRS or RCA multicore cables are required for connection of input and output signals. The eight channels of the DB 25 connector at one side are routed to eight single XLR, TRS or RCA connectors on the other side.

The channel configuration is free (input=output). Here are some common multi-channel configurations:
SMPTE/ITU: L/R/C/LFE/LS/RS/L(t/o)/R(t/0)
DTS: L/R/LS/RS/C/LFE/L(t/o)/R(t/0)
Film: L/LS/C/RS/R/LFE/L(t/o)/R(t/0)
SDDS: L/LC/C/RC/R/LFE/LS/RS


Inputs/Outputs

Instrumentational amplifier, electronically balanced
(differential), transformerless

Nominal Input Level: +4 dBu
Input Impedance: =22 kOhm
Output Impedance: ‹ 600 Ohm
Max. Input Level: › +20 dBu
Volume Gain: ∞ to 4 dB

Measured Data
Frequency Range: 10 Hz-100 kHz
(100 kHz = -3 dB)
CMRR: › 60 dBu@1 kHz
THD: & N (@ +15 dBu Input Level) › -100 dBu
S/N A-weighted: -102 dBu
Crosstalk L/R (@ 1 kHz): › -80 dBu
Dynamic Range: 120 dB

Power Supply
Toroidal transformator:155 VA
Fuse: 250 mA/230 V, 500 mA/115 V
Voltage Selector: 230/50 Hz ‹› 115 V/60 Hz
Power Consumption: ca. 15 W

Dimensions & Weight
Housing:
215 x 80 x 220 mm/8.5 x 3.1 x 8.8 inches
Depth incl. Potentiometer & Sockets:
245 mm/9.8 inches
Weight: 1.9 kg/4.18 lb

Notes:
0 dBu = 0.775 V
Subject to change without notice.

 
Specifications
 
 
 
 
   
Back to top
 
Audio Pros News

Media Centre

Please click on one of our authorised SPL dealers who:
Hold Stock
Can offer you a demo
Can offer advice on all SPL products
Will provide you with a full UK warranty.
Absoltue Music
Digital Village Logo
Dolphin Music
Funky Junk
Jigsaw
KMR
StudioXchange

The Audio Professionals | UK Distributors for Alva Cables, Audio Impressions, Lautens Mics, Mogami Cables, RME Audio & SPL Audio
 
Products Distributed by "The Audio Professionals"
Products Distributed by our sister company "Synthax Audio (UK) Ltd."
 
 
Lauten
Sonodyne
SPL
Grimm Audio
RME
Studiologic
Ultrasone
True Systems
Lehmann
ALVA
 
Microphones
Ref Monitors
Dynamics
Master Clocks
 
Audio Solutions
Keyboards
Headphones
Mic Pre's / DI's
H/phone Amp
Cables
 
       
     
 
     
 
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
                        Tools / Adapters  
   
 
 
 
© Copyright The Audio Professionals Ltd. 2010 • Unit 65, The Wenta Business Centre, Colne Way, Watford, Herts, WD24 7ND, UK • T +44 (0)1923 693770 • F +44 (0)1923 693757